Stainless steel adjustable metal sheet steam trap
I. Introduction:
When the CS17 stainless steel adjustable metal disc steam trap starts up, air enters the steam trap, and the valve core is in the open position at low temperature. Immediately after, condensate enters the steam trap. At low temperature, the bimetallic disc remains flat, the valve core fully opens and quickly discharges the condensate. When hot condensate enters the steam trap, the bimetallic disc begins to bend and deform as the temperature rises, pulling the valve core upward to adjust the seat opening. Before the temperature reaches saturation, the valve core fully closes the valve. After the hot condensate accumulated in the valve cools down slowly, the temperature-sensitive bimetallic disc reduces its deformation, driving the valve core to open the valve and continue discharging condensate. Since hot condensate always exists in front of the valve, steam-water separation is formed, and no steam leakage occurs.
II. Product Features:
1. The discharge temperature can be adjusted at will, the installation orientation is flexible, and all internal parts are made of stainless steel.
2. It forms a water seal using high-temperature condensate, effectively reducing steam leakage.
3. It has sensitive operation, water hammer resistance, no noise, and excellent air removal performance.
4. Simple structure, easy to repair and maintain, suitable for high-temperature steam pipelines.
III. Product Installation:
1. Before installation, check the valve cavity and sealing surface to ensure no dirt or sand particles adhere;
2. Tighten the bolts at all connection parts evenly;
3. Check that the packing part is properly compressed to ensure both the sealing of the packing and the flexible opening of the gate;
4. Before installing the valve, the user must verify the valve model, connection dimensions and pay attention to the medium flow direction to ensure consistency with the valve requirements;
5. When installing the valve, the user must reserve the necessary space for valve actuation;
6. The wiring of the actuation device must be carried out according to the circuit diagram;
7. The gate valve must be maintained regularly, and must not be collided or squeezed at will, so as not to affect the sealing performance.
IV. Performance Parameters:
Shell pressure rank | 1.6、2.5MPa | Maximum work differential pressure | 2.5MPa | Permission back pressure rate | ≥75% |
Load divulging rate | 0% | Suitable superheated steam | Outstanding | Energy conservation effect | Outstanding |
Applied medium | Steam, condensate | Discharge method | Continuous | Water hammer resistance | Outstanding |
| Machinery & Equipment/Valves/Steam Traps | |
